Enter room No. (such as 101#1) and the IP address of master VTH. Master name and master password are the username and password of master VTH. Default username is admin, and the password is the one set from previous step. Security mode is On by default, and you can keep the default status. Tap OK to save the settings. Visit for more details: http://dahuasecurity.com/Follow Dahua Technology:Twitter: https://twitter.com/DahuaHQFacebook: https://www.facebook.com/DahuaHQ/Linke How to do it. Step 1: Plug in the power to the Camera, then wait for the device to finish booting (about 1 minute) Step 2: Press and hold the reset button for 30 seconds, then release the reset button (still holding the power) Step 3: Wait about 1 minute for the device to reboot and reset and proceed to reinstall as new. Note: If reinstalling In this case we have only one hard drive installed on the recorder. Step 4. Select Format. Step 5. Select “Yes” to verify whether you want to format the selected hard drive. Step 6. Click Apply and then Save. The recorder will reboot after the changes are made. Remain/Total: This shows the size of your hard drive. Reset the IP Camera Password using the mobile app DMSS (Email Recovery must have been set up on the device during initialization) > Link to Guide: Reset the IP Camera Password using the reset button (available on most models) Most Dahua IP cameras have a physical reset button on the device that can be used to reset the device to factory defaults. E9ssG.

dahua cctv factory reset